PAHT-CF Nylon Carbon Fiber Filament 1.75mm 0.75Kg eSun

This carbon fiber reinforced ePA6 Nylon filament from eSun is suitable for 3D printed parts that need to withstand high temperatures, stresses, shocks or other mechanical forces. Compared to the ePA-CF Carbon Fiber filament, it has a slightly lower impact toughness at 12.74 KJ/M2 instead of 18.67 KJ/M2. However, it is extremely heat resistant up to 190°C and has a 25% higher tensile strength than the ePA-CF filament. 

WARNING: The recommended print temperature is 260°C-300°C. This is not possible with entry-level printers like the Ender 3 V2. Before you buy the filament, make sure your hotend can reach these high print temperatures. In addition, the filament is very abrasive. We recommend using a stainless steel or hardened nozzle. The filament must be stored dry, as it easily absorbs moisture.  

Recommended Nozzles for Printing:

• Micro Swiss A2 Steel Nozzle coated
• Micro Swiss M2 Steel hardened Nozzle coated

Recommended Accessories:

• eBox Filament Drying Dry Box
  

Features: 

• Very high strength 
• High stiffness 
• Low wear 
• Carbon fiber content of 15% 
• Low density therefore suitable for lightweight construction 
• Extremely high thermal resistance up to 190° 
• Very high chemical resistance 
• Conductive and antistatic 

Application Examples:

• Prototyping
• Model car
• Model airplane 
• Stable brackets
• Electronic devices
• Mechanical parts
• Car parts
• Pinions and gears

ePAHT-CF Carbon Fiber Recommended Print Parameters:

• Print temperature: 260-300°C 
• Heated bed temperature: 45-60°C 
• Fan speed: 0% 
• Feed speed: 40-100mm/s (2400-6000mm/min) 

Download:

• eSun Product Manual
• Safety data sheet

Technical Details:

• Color: Black 
• Item number: ePA6-CF175N0.75 
• EAN: 6922572201194 
• Carbon fiber content: 15% 
• Material: PAHT Nylon with carbon fibers 
• Filament weight: 0.75Kg 
• Diameter: 1.75mm 
• Tolerance: +-0.05mm 
• Print temperature: 260-300°C 
• Heated bed temperature: 45-60°C 
• Density: 1.2g/cm3 
• Impact toughness: 12.74kJ/m² 
• Elongation at break: 8.93% 
• Tensile strength: 173.37MPa 
• Form stability: up to 190°C 
• Spool size outer diameter: 20cm 
• Spool width: 6.7cm 
• Inner diameter (hole): 5.3cm 
• Filament weight: 750g 
• Weight Empty spool: 278g 
• Total weight: 1028g 
• Dimensions: 205 x 215 x75mm 

Delivery contents:

• 1x ePAHT-CF Nylon Carbon Fiber Filament 1.75mm 0.75Kg eSun