PLA+ RGB Blue Filament 1.75mm 1Kg eSun

PLA+ RGB Blue from eSun is based on a standard PLA filament. The following properties have been optimized:

• Brittleness
• Fracture resistance
• Layer adhesion
• Flame retardant
• Odorless when printing

eSUN PLA+ is considered by many as the new standard for PLA printing and offers you great value for money. It is not only easier to process, but you also produce better 3D print parts with smooth and clean surfaces.

Conclusion: PLA+ is very well suited for beginners and professionals, is easy to print, and offers you good adhesion properties and almost no wrap effect when printing! PLA+ is also a very good alternative to ABS if something needs to be impact-resistant, e.g., printed children's toys! PLA+ has very good elongation and flexural strength to withstand falls, bumps, and fractures due to stretching. PLA+ also produces no odors when printing, unlike ABS.

Properties of PLA+:

• Very durable
• Easy to print
• Very good adhesion to the print bed
• Top print quality and great value for money

PLA+ Recommended Printing Parameters:

• Printing temperature: 210-230°C Recommended: 220°C
• Heating bed temperature: 25-70°C Recommended: 60°C
• Fan speed: 50 to 100% Recommendation: 80%
• Feed rate: 40-60mm/s (2400-3600mm/min)

Bambu Lab AMS-Compatible Cardboard Spool:

Our cardboard spools are perfectly tuned for use with the Bambu Lab AMS. The plastic coating of the cardboard running surface allows handling like conventional plastic spools - without an adapter. An environmentally friendly solution that does not compromise on comfort.

• Perfect compatibility: Can be used directly in Bambu Lab AMS without additional tools.
• Easy handling: Thanks to the plastic coating of the cardboard running surface, it can be used like plastic rolls.
• Environmentally friendly: Simple and ecological disposal via cardboard recycling routes.

Download:

• eSun Product Manual
• PLA+ Safety Data Sheet
• Filament Data Sheet

Technical Details:

• Manufacturer: eSun
• Manufacturer SKU: PLA+175P-U1P1
• Color: RGB Blue
• Filament Weight: 1Kg
• Diameter: 1.75mm
• Tolerance: +-0.05mm
• Printing temperature: 210-230°C
• Density: 1.24g/cm3
• Melt Flow Index: 2g/10min
• Impact Resistance: 7kJ/m²
• Elongation at Break: 29%
• Tensile Strength: 60MPa
• Form Stability: 52°C
• Spool Size Outer Diameter: 200mm
• Spool Width: 64mm
• Inner Diameter (Hole): 55mm
• Filament Weight: 1000g
• Total Weight: 1360g
• Dimensions: 198 x 198 x 60mm

Package Contents:

• 1xPLA+ RGB Blue Filament 1.75mm 1Kg eSun