PolyTerra PLA Savannah Yellow Filament 1.75mm 1Kg

PolyTerra PLA is a very easy-to-print filament that enables both beginners and experienced users to achieve reliable results. It is based on a bio-based material specifically developed for easy processing and high print quality. The matte surface gives prints a modern and high-quality look. The excellent layer adhesion ensures stable components while warping is minimized. Thanks to the balanced balance between strength and flexibility, both decorative models and functional prototypes can be reliably produced. The processing is almost odorless and very stable even during long print times. PolyTerra PLA is wound on an environmentally friendly cardboard spool, thus emphasizing the sustainable claim of the product line. Typical applications are demonstration models, casings, components with optical appeal, and projects where environmental awareness and print quality are equally important.

Properties:

• PolyTerra PLA is a bio-based filament with a sustainable character.
• The matte surface gives printed objects a modern look.
• The material offers a good balance between strength and flexibility.
• The layer adhesion is stable and ensures precise results.
• The processing is almost odorless.
• Warping occurs only to a small extent.
• PolyTerra PLA can be processed with consistent print quality.
• The cardboard spool supports the product's ecological approach.

Recommended printing parameters:

• Printing temperature: 190–230 °C, recommended 200 °C
• Heated bed: 25–60 °C, recommended 50 °C
• Fan: 100%
• Print speed: 50-300mm/s

Documentation:

• Wiki and data sheets Polyterra

Technical data:

• Manufacturer: Polymaker
• Manufacturer SKU: PM70850
• Color: Savannah Yellow
• Weight (net): 1 kg
• Diameter: 1.75 mm
• Tolerance: ±0.05 mm
• Density: 1.31 g/cm³
• Melt flow index: 14–20 g/10 min (210 °C/2.16 kg)
• Tensile strength (XY): 23.2 MPa
• Tensile strength (Z): 12.2 MPa
• Elongation at break (XY): 27.8 %
• Elongation at break (Z): 0.9 %
• Bending strength (XY): 40.4 MPa
• Bending modulus (XY): 2209 MPa
• Impact resistance (Charpy XY): 6.7 kJ/m²
• Heat deflection temperature (HDT 0.45 MPa): 57.8 °C
• Outer spool diameter: 200 mm
• Spool width: 65 mm
• Inner hole diameter: 55 mm
• Weight (gross): 1291g
• Dimension: 205 x 225 x 75mm

Scope of delivery:

• 1x PolyTerra PLA Savannah Yellow Filament 1.75mm 1Kg